Map Card And Usb Operation - Macrom M-DVD5542R Owner's Manual

Map Card and USB Operation

Using Map Card (SD/MMC Card)
1. To open the panel first, press the
button on the panel. Insert a map card into
the corresponding slot, the unit will load
the map and switch to navigation mode
automatically, then navigating by the touch
screen.
2. To remove the card, you should first select
another source, in order to avoid damaging
the card, then slide down the panel, press
the card slightly, and take off the card after
it popped out.
Note: You can control the panel using
the touch panel control, refer to previous
section: "Panel Control".
* The panel cannot close if the map card was
not fully inserted or did not remove after
popped it up.
Using USB device
1. Connect your USB device to the USB cable
which you placed in the dashboard or glove
box during installation of the car radio.
When connecting a USB device, the unit
will read the files automatically.
2. To remove the USB device, you should
first select another source, in order to avoid
damaging the USB device.
USB Notes
USB functions (flash memory type) MP3 music play
1. USB flash memory 2 in 1 support
2. Fat 12/fat 16/fat 32 is possible
- Fat 12/16 (dir: 200 support, file: 500 support)
- Fat 32 (dir: 200 support, file: 500 support)
3. File name: 32 byte/dir name: 32 byte /tag name:
32 byte
4. Tag (ID3 tag ver 2.0)
- Title/artist/album: 32 byte support
5. USB 1.1/2.0 support
(It can not support USB 2.0 speed. Just, get the
same speed with USB 1.1)
Not all kinds of USB devices are compatible with
the unit.
Bluetooth Operation
Note:
For your safety, avoid talking on the phone as
much as possible while driving.
Bluetooth is a wireless transmission way
for short distance. The built-in Bluetooth
can connect with the mobile phones having
Bluetooth function.
After connecting, you can control your mobile
phone through the unit.
Pairing
Use this function to establish a connection
between the unit and your mobile phone.
Press the SRC button repeatedly on the panel
or touch BT on the SOURCE menu to enter
BlueTooth mode.
SRC
1 2 3
8 9 0
+
Touch PAIR, then "WAITING FOR PAIRING"
appears on the TFT .
Turn on Bluetooth function of your mobile
phone, keep phone within 3 meters to the unit
and start to search for Bluetooth devices.
After the name of the Bluetooth module "SUN-
BMA19" appears on the pairing list of your
mobile phone, select it. At this time, a pairing
code is required. Enter the pairing code
("1234" by default) and the Bluetooth pairing
will process automatically. Some mobile
phones may instruct you to select connect or
disconnect, please select connecting.
After pairing successfully, the Bluetooth icon
stops to blink, "PAIR OK" will appear on the
screen.
To stop pairing, press PAIR during pairing.
13
PAIR SEL
4 5 6 7