Advertisement
Care and Cleaning
TO REMOVE MESH FILTER
The mesh filter is visible through
the kettle lid opening. Pull
upwards on the tab to remove.
Rinse filter periodically.
WARNING! Burn Hazard: Allow
kettle to cool before attempting
to remove mesh filter.
TO REPLACE MESH FILTER
To replace, slide the filter back
into the slot, ensuring the tab is
facing inwards. The filter will fit
only one way.
WARNING
Electrical Shock Hazard.
Do not immerse kettle, power base, or plug in water or other liquid.
1
To avoid scale/lime deposit build-
up, empty kettle after each use.
To remove discoloration or scale/
lime deposit from heating ele-
ment: Place 1/2 teaspoon cream
of tartar (available in the spice
aisle of grocery store) into the
kettle. Then fill the kettle 1/2 full
with water. Plug in, turn ON (I),
and bring to boil. Turn OFF (O),
let cool, and rinse several times
with clean tap water.
2
Wipe the exterior of kettle with a
damp cloth. Do not use abrasive
scouring pads or powders since
they may scratch the smooth
surface of the kettle.
5
Advertisement
