Water Connection - Electrolux WE 170PP User Manual

Do not touch the mains cable or the mains plug with
•
wet hands.
Do not pull the mains cable to disconnect the appliance.
•
Always pull the mains plug.
Only for UK and Ireland: The appliance has a 13 A
•
mains plug. If it is necessary to change the fuse in the
mains plug, use a 13 A ASTA (BS 1362) fuse.
This appliance complies with the E.E.C. Directives.
•

1.4 Water connection

Do not cause damage to the water hoses.
•
The appliance is to be connected to the water mains
•
using the new supplied hose-sets. Old hose sets must
not be reused.
Before connection to new pipes, pipes not used for a
•
long time, where repair work has been carried out or
new devices fitted (water meters, etc.), let the water flow
until it is clean and clear.
The operating water pressure (minimum and maximum)
•
must be between 0,5 bar (0,05 MPa) and 8 bar (0,8
MPa).
Ensure that there are no visible water leaks during and
•
after the first use of the appliance.
1.5 Use
Do not change the specification of this appliance.
•
Obey the safety instructions on the detergent
•
packaging.
Obey the maximum load volume of 8 kg (refer to the
•
"Programme chart" chapter).
Do not put flammable products or items that are wet
•
with flammable products in, near or on the appliance.
Make sure that you remove all metal objects from the
•
laundry.
Do not touch the glass of the door while a programme
•
operates. The glass can be hot.
ENGLISH 5