Call Transfer - AT&T 1070 Quick Reference Manual

http://www.ochimp.com/
0:0AM /
00:0
0:0AM /
00:0
TRANSFER LINE#
TO
0:0AM /
EXT 
TRANSFER LINE #
TO 
NOTE: If you do not
dial an extension within
0 seconds, the transfer
automatically cancels.
The call is still on hold.
Press the corresponding
LINE key to resume the
call.
0:0AM /
00:0
0:0AM /
EXT 
INTERCOM TO
PAGE
0:0AM /
EXT 
INTERCOM TO 
0:0AM /
EXT 
TRANSFER LINE #
TO 
0:0AM /
EXT 
TRANSFER FROM 
http://www.ochimp.com/

Call transfer

Blind transfer
Use this feature to make a blind transfer. While on
a call:
. Press [TRANSFER]. The outside call is
automatically put on hold. TRANSFER LINE#Y
TO (with Y being the line in use) appears on
the third line of the display.
. Press the one-touch button for the destination
extension.
-OR-
Dial the destination extension number to which
you are transferring the call. The extension
number appears on the fourth line of the
display.
. Hang up.
Your phone reminds you with a double-beep every
0 seconds when a transferred call has not been
answered.
Transfer a call and speak to the receiving party
Use this feature to transfer a call and speak to the
receiving party. While on a call:
Press [INTERCOM]. The outside call is
.
automatically put on hold and INTERCOM TO
displays and the called extension number.
.
Press the one-touch button for the extension to
which you're transferring the call.
-OR-
Dial the extension number to which you are
transferring the call. The extension number
appears on the third line of the display.
. When the other party answers by pressing
[INTERCOM], you can announce the call.
4. Press [TRANSFER].
5. Hang up.
Answer a transferred call
When you hear a long transfer ring, pick up the
handset or press the LINE button of the call to
use the speakerphone or headset.