Allied Telesis AT-AR240E Installation Manual page 12

Hide thumbs Also See for AT-AR240E:

Table of Contents

Installation Guide

Step 2:

Configuring Your Ethernet Network Card

If you have connected your AT-AR240E to the USB Port of your Computer,

please proceed with

If you have connected your AT-AR240E to the Ethernet jack of your Computer,

please proceed with

2.1

Installing the USB Driver Device

DO NOT proceed with this section if you did not connect to the USB

Port of your AT-AR240E.

The following illustrated screen shots serve only as examples. For

any dissimilarities, please follow closely the instructions prompted

on your Computer.

For Windows® 98 Second Edition users, you may be prompted for

your Windows CD-ROM. Have it ready by your side.

2.1.1

Installing the USB Driver Device -

For Windows 98 Second Edition

Power on your computer to start Windows.

Place the ADSL CD-ROM into your CD-ROM Drive. A MAIN MENU will be prompted.

Click Exit.

iii

At the following prompt, click Next.

Installing Your USB Device /

Step 2.1 - Installing the USB Driver Device (page

Step 2.2 - Configuring Your Ethernet Card (page

12).

18).

Table of Contents