Advertisement
ANT4500X_Manual
6/10/99
Installation
1. Connect the right angle end of
the Short Coaxial Cable to the
connector on the bottom of the
Antenna.
2. Locate the Inline "F" Connector
Coupler. Connect the coupler to
one end of the Short Coaxial
Cable. Before proceeding with
connecting the long Coaxial
Cable, go to page 6 and
review mounting directions.
The installation will be easier if
the Antenna is mounted before
the long cable is connected.
5. Connect one end of the 6ft.
Coaxial Cable to the "OUT (to
TV)" connector on the back of
the Amplifier, and connect the
other end to the "Antenna"
connector on the back of your
TV or VCR.
6. The Amplifier should be
positioned in line-of-sight of the
Remote Control.
5
12:45 PM
Page 5
TV Antenna
Element
Back of
Television
Short Coaxial Cable
Inline "F"Connector Coupler
6ft. Coaxial Cable
3. Connect to the other end of the
coupler one end of the 75ft.
Coaxial Cable
4. Connect the remaining end of
the 75 ft. Coaxial Cable to the
"IN" (Antenna) connector on
the back of the Amplifier.
Do not paint with metallic or leaded paints
6ft. Coaxial Cable
Amplifier
Advertisement
