Seat Adjustment - Kelty KIDS SPEEDSTER Instructions Manual

STROLLER OPERATION

- SEAT ADJUSTMENT -

9. CHILD SEAT ADJUSTMENT
(DELUXE & DEUCE ONLY)
The Kelty KIDS Speedster Deluxe and Deuce models
are equipped with reclining seats.
To recline the stroller seat:
A. Lock the parking brakes on the rear wheels of
the stroller (See NOTE).
B. Loosen the seat adjustment webbing by rotating
the plastic ladder lock buckles (Figure 9A and
9B) outward and towards the front of the
stroller. This action reclines the seat back.
C. Loosen both sides of the seat equally, to the
desired position.
Figure 9A
To raise the seat:
D. Lock the parking brakes on the rear wheels of
the stroller (See NOTE).
E. Grasp the stroller handle with one hand.
F. Tighten the seat adjustment webbing by pulling
downward, away from the stroller (Figure 9C
and 9D). This action raises the seat back.
G. Tighten both sides of the seat equally, to the
desired position.
Figure 9C
NOTE
Lock "parking" brakes
1. Stand behind the
stroller, grasp the
handle with
both hands.
2. With your foot,
gently push down
on top of the
parking brake
lever.
Figure 9B
3. Rock the stroller
back and forth to
make sure the
lever is fully
engaged to the
wheel.
4. Repeat steps 2 &
3 on the other
wheel of the
stroller.
14
Figure 9D
STROLLER OPERATION
NOTE
10. FOLDING
A. Remove child and cargo from stroller.
The Speedster
B. Lock the parking brakes on the rear wheels of the
Deluxe and
stroller (See page 13).
Speedster Deuce
C. Rotate the Sun/Rain Hood towards the stroller
strollers are
handle (Figure 10A).
equipped with
D. Rotate the yellow handle latch counterclockwise
a cable/pulley
folding mechanism (Figure 10B) to unlock the handle. Unlock both
–– this mechanism
sides of the stroller handle.
assists with the
E. Unlock the side-brace by sliding the yellow brace
folding and
sleeve to the "UNLOCKED" position (Figure 10C).
unfolding of your
F. Lift up on the frame brace on both sides of the
stroller. On the
stroller (Figure 10D).
Deluxe and Deuce
G. Stand at the back of the stroller and grasp the
models, the rear
handle firmly. Rotate the handle towards the front
wheels and frame
will automatically wheel and fender (Figure 10E).
move when the
H. Continue rotating the handle, closing the stroller to
handle is moved,
the folded position (Figure 10F).
during folding and
unfolding.
If you own the
Speedster model,
the rear wheels and
frame do not move
automatically. You
will have to move
the rear wheels and
Figure 10A
frame by hand – to
fold and unfold the
stroller.
15 Figure 10D
- FOLDING -
Figure 10B Figure 10C
Figure 10E Figure 10F