Kelty KIDS SPEEDSTER Instructions Manual page 6

CHILD SEAT ADJUSTMENT
6. CHILD SEAT ADJUSTMENT
Before loading your child into the stroller, make sure
the child's shoulder harness is unbuckled and the leg
straps are fully loosened.
NOTE: Lock the parking brakes on the rear wheels of
the stroller (see page 13).
A. Unclip the yellow shoulder harness buckles on the
5-point harness (Figure 6A).
B. Loosen the gray webbing leg straps (Figure 6B).
C. Place child in stroller seat.
D. Position the harness crotch strap between child's
legs (Figure 6C).
E. Place the child's shoulder harness over the child's
shoulders (Figure 6D).
Figure 6A
Figure 6C
TIPS
WARNING
If you do not
understand or
are unsure of
any of these
adjustments,
call Kelty
Customer
Support staff,
toll free at
866-349-7225
(866-FIX-PACK).
Figure 6B
Figure 6D
10
CHILD SEAT ADJUSTMENT
TIPS
F. Attach the yellow shoulder harness buckles to the
harness crotch strap (Figure 6E).
G. The child's shoulder harness can be adjusted up
WARNING
or down by sliding it on the webbing at the back
of the child's seat (Figure 6F). Adjust the harness
For the safety of
so the padded section lies smoothly over the
your child, make
child's shoulders.
sure all buckles
are securely
attached and
webbing and
harness are
properly adjusted.
Avoid runways,
always use tether
wrist strap.
H. Adjust the gray webbing leg straps (Figure 6G)
so they fit comfortably over the child's legs by
tightening or loosening the leg straps, at the back
of the child's seat. Make sure the leg straps are not
binding or pinching the child's legs.
11
Figure 6E Figure 6F
Figure 6G