Set-Up Adjustment; Front Wheel; Care And Cleaning; Stroller Features - Kelty KIDS SPEEDSTER Instructions Manual

STROLLER FEATURES

-BEFORE YOU START-
Please Note: Your new Kelty Jogging Stroller comes collapsed /
folded for ease of shipping. It must be set up and adjusted prior
to use.
Unpacking:
Remove the stroller frame and wheels from the carton. The carton for your Kelty
Stroller contains the following:
1 – Jogging Stroller Frame
1 – Quick-Release Front Wheel
2 – Quick-Release Rear Wheels
1 – Wrist Leash
Bell
(Deluxe & Deuce only)
Sun Hood
5-Point Harness
Full Coverage Fender
Quick-Release Wheels

CARE AND CLEANING

• Clean with mild detergent and a damp cloth.
• Allow stroller to air dry.
• Do not use bleach or liquid detergent.
Hand Brake
(Deluxe & Deuce only)
Handle Bar
Height Adjustment
(Deluxe & Deuce only)
Yellow Handle Lock
Locking Side Brace
Parking Brake
4
SETUP / ADJUSTMENT
TIPS
1. FRONT WHEEL ATTACHMENT
A. Make sure the front wheel quick-release mechanism is
NOTE:
in the "OPEN" position (Figure 1A).
The front wheel
B. The front brake, on the Deluxe and Deuce stroller
axle may need to frame, also has a quick-release mechanism. Make
be tightened onto
sure the quick-release lever on the front brake is in
the fork.
the open position (Figure 1B).
To tighten, place
C. Insert the front wheel axle into the fork ends
front wheel in the
(Figure 1C).
fork and twist the
end cap clockwise. D. Secure the wheel in the fork by moving the quick-
release lever into the "CLOSE" position (Figure 1D).
The end cap is
opposite the
E. Check to make sure the front wheel is securely
quick-release
attached to the fork by pulling on the wheel, trying to
lever.
remove the wheel from the fork ends (see note).
5

- FRONT WHEEL -

Figure 1A Figure 1B
Figure 1C Figure 1D