Hyundai DVBT 702 PVR Instruction Manual page 44

There are two ways to edit a channel. If red button is pressed, the system will pop a window
regarding the channel to be added, where the relevant information about the added channel is
to be filled in: Area name, Carrier, Channel Name, Audio PID, Video PID and PCR PID. If yellow
button is pressed, the relevant data of the selected channel, like Channel Name, Audio PID,
Video PID and PCR PID, can be edited:
1.1.5 Delete All
Select this submenu, then enter the password as required before all the TV channels and radio
channels can be deleted.
Press INFO button to bring up Operation Guide window:
Numeric 0-9:
UP/DOWN:
OK:
EXIT:
1.2 Installation
Select Installation, press OK to open the menu which includes 3 submenus:
• Auto Search
• Manual Search
• Area Search
1.2.1 Auto Search
Select Auto Search and press OK to start searching TV channels and radio channels
of the designated area. At the bottom of the window, there will be indication of searching
progress by percentage. Once some channels are detected, they will be listed in two windows
of TV Channels and Radio Channels respectively.
1.2.2 Manual Search
Select Manual Search to search a channel manually with a particular channel name.
In the mean time, the parameters of frequency and bandwidth are also displayed on the menu.
On the right is the list of Channel No., and below are the indication of Signal Intensity and Signal
Quality.
Press INFO button to bring up Operation Guide window:
UP/DOWN:
OK:
LEFT/RIGHT:
EXIT:
1.2.3 Area Search
After Start Frequency, End Frequency and Bandwidth have been set, user can select Area
Search to search channels.
Press INFO button to bring up Operation Guide window:
UP/DOWN:
OK:
LEFT/RIGHT:
EXIT:
Quick navigation;
To navigate;
To select.
Exit from the dialogue.
To navigate;
To select.
To toggle and OK to select.
Exit from the dialogue
To navigate;
To select.
To toggle and OK to select.
Exit from the dialogue.
EN - 44