Ash Removal; Chimney Cleaning - Drolet Escape 1400-I Insert Owner's Manual

Hide thumbs Also See for Escape 1400-I Insert:
Table of Contents

Advertisement

4.2 Ash Removal

CAUTION:
Ashes can start fires, even after several days of inactivity. Never dispose of
ashes in a combustible container. Remove ashes only when the insert and
ashes are cold.
Ashes should be removed from the insert frequently. When ashes are removed, they should be
placed in a metal container with a tightly fitting lid. The closed container of ashes should be placed
on a non-combustible floor or on the ground, well away from all combustible materials, pending
final disposal. If the ashes are disposed of by burial in soil or otherwise locally dispersed, they
should be retained in the closed container until all cinders have thoroughly cooled. Do not place
other waste materials in the metal ash container.

4.3 Chimney Cleaning

Regular chimney maintenance, as well as good burning practices, are required to prevent chimney
fires. The chimney and the chimney connector pipe must be maintained in good condition and be
kept clean for optimal safety. The chimney should be checked regularly for creosote build-up.
Inspection and cleaning of the chimney can be facilitated by removing the baffle.
C
: O
AUTION
PERATION
H
T
AZARDOUS
EMPERATURE
Contact your local, municipal, state, or provincial fire authority for information on how to handle a
chimney fire before there is any chance that it may happen.
Creosote – Formation And Need For Removal
When wood (especially green wood) is burned without adequate heat or air supply, it produces tar
and other organic vapours (smoke), which combine with expelled moisture to form creosote.
The creosote vapours condense in the relatively cool chimney flue of a slow-burning fire. As a
result, creosote residue accumulates on the flue lining. When ignited, this creosote makes an
extremely hot fire, which could be hazardous. Check frequently for creosote build-up. In the event
of a insert or chimney component failure, replace only with equipment that is equivalent to the
original, available from your Drolet dealer.
Your Drolet insert has been designed to reduce the amount of creosote produced. Even so, the
chimney connector pipe and chimney should be inspected at least once every two months during the
heating season to determine if a creosote build-up has occurred. If creosote has accumulated, it
should be removed to reduce the risk of chimney fire. Call a professional chimney sweep, or go to
your local Drolet dealer and purchase a chimney brush, and have the chimney cleaned.
22
O
Y
D
I
F
OUR
ROLET
NSERT
C
A
ONDITIONS
ND
W
T
B
ITHOUT
HE
AFFLE
W
V
T
W
ILL
OID
HE
ARRANTY
M
C
U
AY
AUSE
NSAFE
.
A
ND

Advertisement

Table of Contents
loading

Table of Contents