Troubleshooting: Local Network Issues - Loopcomm LP-9696GR User Manual

Troubleshooting: Local Network Issues

My computer is getting an IP address of 169.254.x.x and Windows says "Limited or no Connectivity."
1. Make sure the High Power Router is powered on.
2. Check that your computer's network adapter is enabled and is set to "Obtain IP Address
Automatically."
3. Release and Renew your IP Address on your computer. To do this on a Windows computer:
- Click Start>Run
- When the command prompt appears, type
- Type ipconfig/renew
- Check that your computer's network adapter has an IP address of
d. Restart your computer and check again.
e. Restart the High Power Router and check again.
f. Make sure DHCP is enabled in the High Power Router's Web Menu (Go to More Settings > IP Settings
> Local Area Network (LAN) > DHCP Settings.
g. Check that your Firewall or Anti-Virus software is not preventing you from accessing shared devices
on you network.
and type CMD
ipconfig/release
and press enter
and press enter
192.168.3.x
60