Wireless Settings: Advanced Settings - Loopcomm LP-9696GR User Manual

Wireless Settings: Advanced Settings

Advanced Wireless Settings should only be
adjusted by technically advanced users. It is not
recommended that novice users adjust these
settings to avoid degrading wireless performance.
Fragment Threshold: The default and
recommended setting is at 2346, meaning the High
Power Router will never fragment any frames that it
sends to wireless users.
RTS Threshold: Adjusts the size of RTS data
packets. Lower values reduce throughput, but
allow the system to recover quicker from
interference/collisions. Higher values provide the
fastest throughput.
Beacon Interval: Indicates the frequency interval of the beacon. A beacon is a packet broadcast by the router
to synch the wireless network.
Preamble Type: Defines the length of the Cyclic Redundancy Check for communication between the router and
roaming wireless users.
IAPP: Inter-Access Point Protocol
STBC: Space Time Block Coding improves reception by coding the data stream in blocks.
22