Usb Printer - D-Link DNS-300 Manual

USB Printer

By connecting the USB printer to DNS-300, you would be able to share the USB printer
through the network and USB printer status will become active in this page.
Refresh the USB printer's status
Click Refresh to update the printer status.
Eject the USB printer
We suggest clicking the Eject button before you remove the printer.
Steps for configuring USB printer in Windows
1. Open My Network Places and connect to the DNS-300.
Warning!!
All data on your disk will be deleted by formatting. It
cannot be restored, so please take care before
formatting.
2. If you want to remove the USB device, please click the Eject
button in the top half of the window before removing the device
from the disk station.
Note:
To take advantage of the D-Link USB Fast Copy function,
insert your USB Flash device into the USB port and push
the Power button after 3 to 4 seconds have elapsed. This
will initiate a Fast Copy to your NAS.
44