Firmware Upgrade; Firmware Upgrade Via Usb - D-Link DNS-1560-04 User Manual

1u 4-bay rackmount unified storage

Hide thumbs Also See for DNS-1560-04:

Table of Contents

D-Link Document – User Manual

It will perform the following major tasks

Restore Admin password to 1234



Reset the management port to the default IP address, this is 192.168.0.32.



Clear all user/group accounts and default directory service to Standalone.



Clear all access right settings for shares.



Clear all snapshot, replication, backup tasks.



Please be aware that "Reset to factory defaults" will not delete the user data in UserHome file

system. If you create a local user account with the very same name, the system will see it as the

same user and use the original user account folder.

Firmware Upgrade

The Firmware Upgrade is used to upgrade controller firmware.

Please prepare new controller firmware file named "xxxx.bin" in local hard drive, then click

Browse to select the file. Click Upgrade button to start upgrading the firmware. When upgrading,

there is a percentage displayed. After upgrading is finished, the system must reboot manually so

the new firmware can take effect.

Table of Contents