Lexus 2013 GS 350 Owner's Manual page 653

Installing towing eyelet
Take out the towing eyelet ( P. 723)
1
Remove the eyelet cover using a
2
flathead screwdriver.
To protect the bodywork, place a rag
between the screwdriver and the vehi-
cle body as shown in the illustration.
Insert the towing eyelet into the
3
hole and tighten partially by hand.
Tighten down the towing eyelet
4
securely using a wheel nut
wrench.
GS350_U (OM30C34U)
7-2. Steps to take in an emergency
I n f o r ma t i o n P r o v i d e d b y :
679
7