Lexus 2013 GS 350 Owner's Manual page 111

3-3. Adjusting the seats
Auto return function when entering the vehicle (driver's seat only)
■
When either of the following actions has been performed, the steering
wheel will move toward the driver and seat will move forward:
• The engine switch has been turned to ACCESSORY mode.
• The driver' s seat belt has been fastened.
When driving position memory is linked with door unlock operation
■
If the driver' s door is opened, the driver' s seat will move toward the memorized posi-
tion but stop slightly beforehand to allow easy access to the vehicle.
Turning the engine switch to ACCESSORY or IGNITION ON mode, or fastening
the driver' s seat belt moves the seat fully into the memorized position.
Operating the driving position memory after turning the engine switch off
■
Driver' s seat:
Memorized seat positions can be activated up to 180 seconds after the driver' s door
is opened and another 60 seconds after it is closed again. Memorized steering
wheel position can be activated by pressing the engine switch.
Front passenger' s seat:
Memorized positions can be activated up to 180 seconds after the front passenger' s
door is opened by pressing button "1", "2" or "3".
Correct seat position
■
When the seat is in the most forward or most backward position, and the seat is
being moved in those directions, the system may not correctly recognize the current
position and the memorized position will not be correctly recalled.
The auto away function for exiting the driver's seat
■
If the seat is already close to the rearmost position, the auto away function may not
operate when the driver exits the vehicle.
Customization
■
The distance that the driver' s seat moves backward during the auto away function
can be changed. (Customizable features:
GS350_U (OM30C34U)
P. 777)
I n f o r ma t i o n P r o v i d e d b y :