5-1. Remote Touch screen
Voice command system
■
Commands that are not displayed in the "Shortcut Menu" screen can be operated
●
from the "Main Menu" screen.
If the system does not respond or the confirmation screen does not disappear,
●
press
and try again.
Voice guidance can be canceled by setting voice prompts to off. Use this setting
●
when it is desirable to say a command immediately after pressing
a beep.
If a voice command cannot be recognized
■
If a voice command cannot be recognized within 6 seconds, voice guidance will
●
say "Pardon?" ("Command not recognized. " will be displayed on the screen) and
voice command reception will restart.
If a voice command cannot be recognized 2 consecutive times, the voice com-
●
mand guidance system will say "Paused. To restart voice recognition, push the talk
switch. To cancel voice recognition, push and hold the talk switch. " Voice recogni-
tion will then be suspended. Select "Cancel" or "Go Back", or press
When selecting "Voice Prompts"
■
The voice recognition prompt can be set to on or off. This setting can also be
●
changed on the "Voice Settings" screen. ( P. 330)
Voice recognition will be temporarily suspended. Press
●
GS350_U (OM30C34U)
I n f o r ma t i o n P r o v i d e d b y :
and hearing
.
again.