4-3. Operating the lights and wipers
Switching between the intermittent windshield wipers and rain-
sensing windshield wipers (vehicles with rain-sensing windshield
wipers)
The wipers can be used as intermittent windshield wipers, which operate
regardless of vehicle speed or amount of raindrops.
Press and hold
mode indicator stops flashing.
If
is pressed and held until the
AUTO mode indicator stops flashing
again, it will return to its previous state.
The wiper can be switched when the
vehicle is stopped and the wiper is off.
The windshield wiper and washer can be operated when
■
The engine switch is in IGNITION ON mode.
Dripping prevention wiper sweep
■
After washing and wiping operation several times, the wipers operate one more time
after a short delay to prevent dripping.
However, the last sweep will not happen if the vehicle is traveling above 106 mph
(170 km/h).
Effects of vehicle speed on wiper operation
■
Vehicle speed affects the following even when the wipers are not in AUTO mode.
Intermittent wiper interval
●
Wiper operation when the washer is being used (delay until drip prevention wiper
●
sweep occurs)
With low speed windshield wiper operation selected, wiper operation will be
switched from low speed to intermittent wiper operation only when the vehicle is sta-
tionary.
GS350_U (OM30C34U)
until the AUTO
I n f o r ma t i o n P r o v i d e d b y :