EDL Displays 6120 Operation And Maintenance Manual page 47

24. Attach the CRT base connector assembly to the CRT.
25. Connect the anode lead to the CRT anode button on top the CRT.
26. Install the two DeGauss coil leads into four pin connector S8 with the white lead in
pin 1.
27. Install the modules into the chassis.
28. At this time perform the VIDEO AMPLIFIER ALIGNMENT PROCEDURE contained
in the Model 6115, 6116 & 6119 Operation and Maintenance Manual.
29. Replace the perforated metal shield top cover onto the chassis.
30. Place the monitor on its face on a soft surface and install the rear plastic cover.
Secure with four Phillips head screws.
31. Pat yourself on the back and take the rest of the day off.
6115 - 6120 Operation and Maintenance Manual ©EDL Displays, Inc. January 1997
43