Pincushion Adjustment - EDL Displays 6120 Operation And Maintenance Manual

The monitor will indicate that it is in the trapezoid mode by briefly displaying a trapezoidal
video outline and then returning to the original setting.
Make the trapezoid adjustment by rotating the contrast control slowly until the control
"locks on" and then set the control to eliminate the trapezoidal effect.
To advance to the pincushion adjustment mode, press and release the DeGauss/Mode
switch.

PINCUSHION ADJUSTMENT

The monitor will indicate that it is in the pincushion mode by briefly distorting or pin-
cushioning the top and bottom of the screen toward the center and then returning to the
original setting.
Make the pincushion adjustment by rotating the contrast control slowly until the control
"locks on" and then set the control to eliminate any pincushion effect.
To exit the extended calibration mode, press and release the DeGauss/Mode switch.
6115 - 6120 Operation and Maintenance Manual ©EDL Displays, Inc. January 1997
24