Installing Hard Drives - HP ProLiant ML150 Installation Sheet

Figure 5 Removing the air baffle
Installing an accessory card
Figure 6 Installing an accessory card

Installing hard drives

This system can support SATA drives and SAS drives in non-hot-plug
and hot-pluggable hard disk drive cages.
Non-hot-plug drive installation
Figure 7 Removing a non-hot plug HDD cage
Figure 8 Installing a non-hot-plug drive
Hot-plug drive installation
Figure 9 Installing a hot-plug drive
Installing optical drives
The lower two half-height drive bays are shipped with drive bay
shields. Remove a shield by by pulling it away from the front of the
chassis (Figure 10).
Figure 10 Removing an optical drive bay shield