Service; Programming Mode - Miele W1113 Technical Information

Technical Information
4

Service

4.1

Programming Mode

Initial Requirements
1. Finish or cancel any program in operation.
2. Switch off the machine.
3. Close the door.
Note
Once you begin the access procedure, it must be completed within
10 seconds.
Accessing
1. Press and hold the Start button while switching the unit on with
the On/Off button.
2. Release the Start button 2 seconds after switching the
appliance on.
3. Immediately press and release the Start button 4 times.
4. Press and hold down the Start button a 5th time, until the Start
LED flashes.
Acknowledgement indicator
Rapid flashing Start LED.
Options / Navigation
1. Refer to Tables 070-3 through 070-9.
2. The Program Position is displayed by the flashing rhythm of the
Buzzer LED.
Press the Buzzer button to advance through the Program
Positions.
The current programmed option is displayed by the flashing
rhythm of the Drying LED.
Press Start button to toggle between the available options.
Save and quit
With the desired option displayed. Press the On / Off Button to
shut off the appliance and store the desired setting.
W1113, W1119, W1203, W1213 & W1215 Clothes Washers
50