Rewind Starter - Stihl FS 94 Instruction Manual

Hide thumbs Also See for FS 94:
Table of Contents

Advertisement

Available languages

Available languages

English
WARNING
To reduce the risk of fire and burn injury,
use only spark plugs authorized by
STIHL. Always press spark plug boot (1)
snugly onto spark plug terminal (2) of the
proper size. (Note: If terminal has
detachable SAE adapter nut, it must be
securely attached.) A loose connection
between spark plug boot and ignition
wire connector in the boot may create
arcing that could ignite combustible
fumes and cause a fire.
Installing the Spark Plug
Fit the spark plug and tighten it
N
down firmly.
Press the boot firmly onto the spark
N
plug.
32
2
1
Fit the cap (1), insert the screw (2)
N
and tighten it down firmly.
2

Rewind Starter

1
To help prolong the wear life of the
starter rope, observe the following
points:
Pull the starter rope only in the
N
direction specified.
Do not pull the rope over the edge of
N
the guide bushing.
Do not pull out the rope more than
N
specified.
Do not allow the starter grip to snap
N
back, guide it back into the housing
slowly – see chapter on "Starting /
Stopping the Engine."
Have a damaged starter rope replaced
by your dealer before it breaks
completely. STIHL recommends that
you have servicing and repair work
carried out exclusively by an authorized
STIHL servicing dealer.
STIHL FS 94 R

Advertisement

Chapters

Table of Contents
loading

Table of Contents