Rating Plate; Mini-Manual; Door Reversal - GE ETS22 Technical Service Manual

RATING PLATE

The rating plate, located inside the refrigerator
on the upper left-hand side, contains the model
and serial numbers. Additionally, the rating plate
specifies the minimum installation clearances,
electrical voltage, frequency, maximum
amperage rating, and refrigerant charge and
type.

MINI-MANUAL

The mini-manual, located behind the base grille,
is secured to the underside of the cabinet for
shipping with a piece of tape. After referencing
the mini-manual, return it to its original location
for future use.

DOOR REVERSAL

Torx head (T-20) screws are used to mount the
top, center, and bottom hinges to the cabinet.
Mounting holes in the hinges are not elongated,
and the hinges are not adjustable. When
reinstalling the hinges, tighten screws firmly but
avoid overtightening to prevent stripping.
Note:
• When reversing the door swing, read all
instructions thoroughly before starting.
• When handling parts, use caution to avoid
scratching paint.
• Sort screws to correspond with related parts
and be certain to use the proper screw with
each part.
• Place doors on a protected surface to
prevent damage.
• Once the door reversal procedure has been
initiated, do not move the cabinet until the
procedure is complete.
• Unplug the refrigerator from its electrical outlet.
• Empty all door shelves, including the dairy
compartment.
Rating Plate Location
Mini-Manual Located Under Base Grille
– 6 –