Rating Plate; Door Reversal - GE GTRS0 Series Technical Service Manual

RATING PLATE

The rating plate, located inside the refrigerator
on the upper left-hand side, contains the model
and serial numbers. Additionally, the rating plate
specifies the minimum installation clearances,
electrical voltage, frequency, maximum
amperage rating, and refrigerant charge and
type.
MINI-MANUAL
The mini-manual, located behind the base grille,
is secured to the underside of the cabinet for
shipping with a piece of tape. After referencing
the mini-manual, return it to its original location
for future use.

DOOR REVERSAL

head WITH 5/16"SOCKET SCREWDRIVER
used to mount the top, center, and bottom
hinges to the cabinet. Mounting holes in the
hinges are not elongated, and the hinges are
not adjustable. When reinstalling the hinges,
tighten screws firmly but avoid overtightening to
prevent stripping.
Note:
• When reversing the door swing, read all
instructions thoroughly before starting.
• When handling parts, use caution to avoid
scratching paint.
• Sort screws to correspond with related parts
and be certain to use the proper screw with
each part.
• Place doors on a protected surface to
prevent damage.
• Once the door reversal procedure has been
initiated, do not move the cabinet until the
procedure is complete.
• Unplug the refrigerator from its electrical outlet.
• Empty all door shelves, including the dairy
compartment.
Rating Plate Location
are
Mini-Manual Located Under Base Grille
– 18
–