Installing The 1-Bin Finisher (Da-Fs300) - Panasonic DP-3030 Service Manual

8.23. Installing the 1-Bin Finisher (DA-FS300)

8.23.1. Contents
Qty.
1 1-Bin Finisher
1 Finisher Tray Assembly
1 Base Bracket
1 Front Slide Guide Bracket
1 Rear Slide Guide Bracket
1 IPC PC Board
Optional LVPS
1
1 FNS Harness
1 LVS2 Harness
2 Snap Ring
4 Thumb Screw (Silver)
7 Screw
1 Installation Instructions
Note:
1. The part number may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
3. Before you begin the installation of your 1 Bin Finisher (DA-FS300), read these entire
instructions.
8.23.2. Installation
CAUTION!
Turn the Power Switch on the Left Side and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
3.94 in
(100 mm)
51.65 in
(1312 mm)
Ver.2.1
Description
3.94 in (100 mm)
3.94 in
(100 mm)
3.94 in
(100 mm)
71.06 in
(1805 mm)
Part No.
See Note
PF4124K127
PF4124P001
PF4124P002
PF4124P003
PF4117P003
ETXDN282A4AA For USA and Canada
ETXDN282E4AA
DZFP001448
DZFP001407
PF2252P619
PF4124P023
XTW3+6LFC
DZSM000689
Note:
Make sure that there will be adequate space for
working area (i.e., removal of paper).
336
DP-2310/3010
DP-2330/3030
Remarks
For EU and Other
Destinations
This document
MAR 2005