Installing The Fax Communication Board (Da-Fg300) - Panasonic DP-3030 Service Manual

8.11. Installing the Fax Communication Board (DA-FG300)

8.11.1. Contents
Qty.
FXB PC Board Assembly
1
1 MJR PC Board Assembly
1 MJR Harness
1 LIN Harness
1 Speaker
1 Telephone Line Cable
1 Type Approval Label
1 Line Label
5 Screw
1 Quick Guide
1 Operating Instructions CD
1 Installation Instructions
Note:
1. If also installing the Program Expansion Board (DA-EM600), it must be installed first.
2. The part number may differ depending on the Destination.
3. Refer to the Parts List in the Parts Manual.
8.11.2. Installation
Install the Hardware by following the steps below.
CAUTION!
Turn the Power Switch on the Left Side and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
Ver. 2.1
Description Part No.
See Note
See Note
See Note
See Note
See Note
See Note
See Note
See Note
See Note
See Note
For Facsimile and Internet FAX/
Email
See Note
See Note This document
(1) Remove 4 Silver Screws.
(2) Open the Rear Cover.
299
DP-2310/3010
DP-2330/3030
Remarks
MAR 2005