Introduction - Global Water G3 Operation Manual

Congratulations on your purchase of our revolutionary Bottle-less
Water Cooler! Our coolers are all designed to replace the conventional
5-gallon water bottles while eliminating the hassles of deliveries,
lifting bottles, and by eliminating plastic bottles from landfills. Our
coolers are designed to produce pure, great tasting water for the
whole family that is clean and safe to drink.
Our coolers are connected to your city or well water supply to
efficiently filter out tastes and odor, and to remove microscopic
contaminants by using reverse osmosis purification technology. We
manufacture a wide range of models to fit any home or office
application.
G3 and G4 Models Both of these models have two temperature
faucets. The cold water is chilled around 44ºF and the hot water is
heated at 180ºF.
All Global Water models are manufactured and marked as "RO" or
"F" assemblies. The "RO" assembly utilizes Reverse Osmosis water
purification technology that produces pure and safe water from city or
well water. The "RO" assembly is comprised of a 5-micron sediment
filter, a carbon (GAC) 10-micron filter, RO membrane and a post
carbon filter to improve taste. The "RO" filter assembly requires a
drain line connection to be installed, which removes rejected water to
the sewer.
The "F" assembly is comprised of sediment and 2 carbon filter
system, but not the RO membrane. Therefore, it does not require a
drain line connection.
CAUTION: The filter version "F" must be used only with softened
water or water that has less than 3.5 grains of hardness to prevent
scaling and premature burnout of the heating elements.
Please read all the instructions in this manual before operating this
unit.
3 | P a g e

Introduction