Advertisement
C L E A N I N G / M A I N T E N A N C E
CLEANING/MAINTENANCE
INSTRUCTIONS
Follow these instructions to correctly and safely care for
your table fan. Please remember:
• Always unplug the fan before cleaning or
disassembling.
• Do not allow water to drip on or into the fan motor
housing.
• Do not use any of the following as a cleaner:
gasoline, thinner, or benzene.
Step 1: Remove the front grill by expanding the clips
located around the perimeter of the grill and
remove the bottom grill screw.
Step 2: Remove the blade by loosening the securing
screw.
Step 3: Clean the fan blade, both front and rear grills
with a soft cloth moistened with a mild soap
solution.
Step 4: Replace blade, tighten the fan blade by screwing
the fan blade back on, and securely fasten the
front grill by closing the clips over the perimeter
of the grill and tighten the bottom grill screw.
Fan Head and Base Cleaning
Using a soft, moist cloth, with or without a mild soap
solution, carefully clean the fan base and head. Please
use caution around the motor housing area. Do not allow
the motor or other electrical components to be exposed to
water.
FAN STORAGE
When storing your fan in the off season, it is important to
keep it in a safe dry location. It is important to protect
the fan head from dust. WE STRONGLY RECOMMEND
USING THE ORIGINAL BOX FROM PURCHASE.
If you have any questions regarding your product or
would like to learn more about other Bionaire
please contact our Consumer Service Department at
1-800-253-2764 or visit our website at
www.bionairecanada.com.
products,
®
Advertisement
