Table of Contents
Advertisement
Fan Speed Ratio [10/15]
This item allows you to select the appropriate fan speed ratio for the system. The
default [10/15] is the minimum fan speed ratio. Select a higher ratio if you installed
additional devices and the system requires more ventilation. This item appears
only when the Q-Fan Control item is set to [Enabled]. Configuration options: [10/
15] [11/15] [12/15] [13/15]
[14/15] [Full Speed]
Speed Up/Down Response Time [4 Sec/8 Sec]
This item indicates the time period before the fan speeds adjust to the value set in
the Fan Speed Ratio field. This item appears only when the Q-Fan Control item is
set to [Enabled]. Configuration options:
[1 Sec/2 Sec] [2 Sec/4 Sec] [3 Sec/6 Sec] [4 Sec/8 Sec]
CPU Fan Speed [xxxxRPM] or [N/A]
Chassis Fan Speed [xxxxRPM] or [N/A]
Power Fan Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the CPU,
chassis, and power fan speeds in rotations per minute (RPM). If any of the fans is
not connected to the motherboard, the specific field shows N/A.
VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators.
If any of the monitored items is out of range, the following error message
appears: "Hardware Monitor found an error. Enter Power setup menu for
details". You will then be prompted to "Press F1 to continue or DEL to enter
SETUP".
2-28
Chapter 2: BIOS information
Advertisement
Table of Contents
