Asus Motherboard P4PE BP User Manual page 33

10. USB header (10-1 pin USB_56)
If the USB ports on the rear panel are inadequate, a USB header is available
for additional USB ports. The USB header complies with USB 2.0 specification
that supports up to 480 Mbps connection speed. This speed advantage over
the conventional 12 Mbps on USB 1.1 allows faster Internet connection,
interactive gaming, and simultaneous running of high-speed peripherals.
If your package came with a USB 2.0/GAME module, connect the USB cable
to this header. The module has two USB 2.0 ports that support the next
generation USB peripherals such as high resolution cameras, scanners, and
printers.
You must install the driver before you can use the USB 2.0 capability.
P4PE BP
P4PE BP USB 2.0 Header
11. Internal audio connectors (4-pin CD1, AUX1, MODEM1)
(on audio models only)
These connectors allow you to receive stereo audio input from sound sources
such as a CD-ROM, TV tuner, or MPEG card. The MODEM connector allows
the onboard audio to interface with a voice modem card with a similar
connector. It also allows the sharing of mono_in (such as a phone) and a
mono_out (such as a speaker) between the audio and a voice modem card.
P4PE BP
P4PE BP Internal Audio Connectors
ASUS P4PE BP motherboard user guide
®
USB_56
®
CD1(Black)
1
MODEM1
AUX1 (White)
Left Audio Channel
Ground
Ground
Right Audio Channel
1-23