Fisher & Paykel OB60 User Manual page 48

Removing the side racks and catalytic panels
IMPORTANT!
Always turn off the oven at the wall first. Ensure the oven has cooled down completely
before starting.
Remove all shelves
1 Slide out all shelves and remove.
For easier access we recommend removing the
oven door. See 'Removing and refitting the oven door'.
Remove both side racks (and catalytic panels if fitted):
1 Unscrew and remove the fixing nut at the front of the side rack. Use a coin to loosen the
nut if necessary.
2 Pull the side rack toward the center of the oven until the front tab is clear of the fixing
nut. If catalytic panels are fitted remove them at the same time (pull the panel toward
the centre of the oven along with the side rack).
3 Slide the side rack (and catalytic panel if fitted) forward until the rear prongs are clear
of the holes.
4 You may now slide the catalytic panel off the side rack rear prongs.
Fixing nut
Fixing screw
46
CARE AND CLEANING
(some models only)
Catalytic
panel (if fitted)
Remove all shelves
Rear prong