Fisher & Paykel OB60 User Manual page 17

Fitting the sliding shelf supports
IMPORTANT!
Compact ovens only:
The sliding shelf supports cannot be used on shelf positions 3 and 4.
To fit
1 Ensure the slides are the correct way
around (the front of the slide has the
triangular shaped tab as shown).
2 Fit the top of the clips over the side rack,
the front clip should be fitted as close to
the front of the side rack as possible.
Make sure the rear clip has engaged.
3 Rotate the slide down and 'click' the
bottom of the clips into place.
INTRODUCTION
Clip
Front of Left Hand Slide
Tab Tab
Front of Right Hand Slide
Clip
15