Drying Tips - GE DDE8107M Use And Care Manual

desired. (See below.)
cycle setting. The selector may be
turned in either direction.
to start dryer. (Opening the door
during operation stops the dryer. To
the START button.)
End-of-Cycle Signal
(Operates with any cycle.)
Variable Signal
LOUD
OFF
The Signal control can be set
anywhere between OFF and
LOUD, depending on desired
sound level. The signal will sound
just before the end of the cycle to
remind you to remove the clothes.
To stop signal while sounding, turn
Signal control to OFF or advance
Cycle Selector to OFF.
The Signal should always be
when drying Polyester Knits or
Permanent Press items which
should be removed as soon as the
dryer stops to help prevent setting
of wrinkles.
The signal should also be used with
the Extra Care Cycle.
Dryness selections guide for the automatic cycles
Set to
Middle
Position
Set
toward
MORE
Set
toward
LESS DRY
Polyester Knits &
Permanent Press

drying tips

DO N~ OVERLOAD—
Garments being dried or
PROMPTLY-To help prevent
promptly at the end of the drying
cycles.
PLACE ON HANGERS—
Permanent Press and Polyester
Knit garments look best if placed
on hangers after drying.
used
DRY
. .
5
For most normal loads.
that
For loads include heavy
weight fabrics.
If you desire to remove more moisture.
For lightweight fabric loads.
If you desire to remove less moisture.
For very small loads.
What is the difference
between Automatic &
Automatic Drying
When using the AU~MATIC
cycles, the Automtic Dry Control
temperature of the air in the dryer
drum. Wet laundry keeps this air
cool. When laundry is dry enough
(and the drum air warm enough)
the heat turns off. When the air
cools, the heat turns back on. This
off and on cycling may happen a
number of times (depending on the
fabric, load size, and Cycle
Selector setting). The Cycle
Selector advances (when the heat is
dryer.
Timed Drying
When using the TIMED CYCLES,
you select the number of minutes
you wish the dryer to run and it
turns off at the end of this time
period.