How To Operate Your Dryer - GE DDE8107M Use And Care Manual

Do not operate this appliance
if it is damaged, malfunctioning,
partially disassembled, or has
missing or broken parts, including
a damaged cord or plug.
If yours is a gas dryer, it is
ignition and does not have a pilot
light. DO N~ ATTEMPT ~
LIGHT WITH A MA~H. Bums
may result from having your hand
in the vicinity of the burner when
the automatic ignition may turn on.

How to operate your dryer

read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
Clean the lint filter each time the
dryer is used. Always be sure the
lint filter is in place. Don't use the
dryer without it.
Good sorting for the dryer begins
at the washer. Generally, if clothes
are sorted right for washing, they're
sorted right for drying. See page 8
for sorting help. (If you do mix
various types of fabrics in your
load, set the controls for the
lighter-weight fabrics and remove
when dry. Reset controls for the
remaining heavier fabrics. )
Set the Controh
See the Controls Setting Guide
on pages 6 and 7.
Dryer-applied fabric
softeners or anti-static
conditioners
You may wish to soften your
laundered fabrics or reduce the
static electricity in them. We
fabric softener in the wash cycle,
according to the manufacturer's
instructions for those products, or
try a dryer-added product for
which the manufacturer gives
written assurance on the package
that their product can be safely
used in your dryer.
II
Fabric Care Selections
Push a button to select the proper heat for your load.
Fabric Care
Selections
Cottons
High Hest
Perm Press
Medium Heat
Fluff
No Heat
(Operates only with Automatic
Perm Press& Knits Cycle.)
Turn to ON if desired. To minimize
Care cycle provides approximately
15 minutes of no-heat tumbling
after the clothes are dry.
4
Service or performance problems
caused by the use of these products
are the responsibility of the
manufacturers of those products
and are not covered under the
warranty of this appliance.
INSTRUCTIONS
II
Should be used with cycles indicsted
Automatic,
Automatic Perm Press and
Regular Cycle Knits Cycles
Use End-of-Cycle Signal. Signal
will sound at five-minute intervals
to remind you to remove the clothes.
Timed
Cycles