Drying Tips - GE DDE6608L User And Care

End-of-Cycle Signal
(Operates with any cycle.)
OPT
turn the switch to ON. The signal
clothes.
To stop signal while sounding, turn
Signal switch to OFF or advance
Cycle Selector to OFF.
The Signal should always be used
when drying Polyester Knits or
Permanent Press items which
should be removed as soon as the
dryer stops to help prevent setting
of wrinkles.
The signal should also be used with
the Extra Care Cycle.
—.
Polyester Knits &
Permanent Press

drying tips

DO N~ OVERLOAD-Garments
being dried or dewrinkled should
tumble freely.
REMOVE CL~HES PROM~LY
—To help prevent wrinkling, remove
from the dryer promptly at the end
of the drying cycles.
PLACE ON HANGERS—
Permanent Press and Polyester
Knit garments look best if placed
on hangers after drying.
5
What is the difference
between Automatic &
Timed drying?
Automatic Drying
When using the AUTOMATIC
cycles, the Automuti~> Dry Control
temperature of the air in the dryer
drum. Wet laundry keeps this air
cool. When laundry is dry enough
(and the drum air warm enough)
the heat turns off. When the air
cools, the heat turns back on. This
off and on cycling may happen a
number of times (depending on the
fabric, load size, and Cycle Selector
setting). The Cycle Selector
advances (when the heat is offi until
it automatically turns off dryer.
Timed Drying
When using the TIMED CYCLE,
you select the number of minutes
you wish the dryer to run and it
turns off at the end of this time
period.