Advertisement
Your Touch Control Panel
The Touch Control Panel allows you to set the oven
controls electronically with the touch of a finger. It's
designed to be easy to use and understand.
When You Plug in the Oven
The display panel displays five 8's, "18 POWER" and
all of the oven functions. After 15 seconds, all lights
disappear and "RESET" appears in the upper portion.
Touch the CLEAR/OFF
pad, set the Clock and oven is
ready for use.
If power is disrupted at any time, the above sequence
recurs, and you must reset Clock after touching the
CLEAR/OFF
pad.
"PRObE" Appears on the Display
Probe has been forgotten when Auto Roast or Temp
Cook/Hold function is being used.
s Probe is not securely seated in oven wall receptacle.
1. DISPLAY. Displays time of day, time or temperature
during cooking functions, power level being used,
cooking mode and instructions.
2. TIME COOK 1 & 2. Microwave for a preset amount
of time using automatic power level 10. (If desired, you
may change power level after entering cooking time. See
page 10.)
3. TIME DEFROST. Gentle thawing at automatic power
level 3 (Low). (If desired, you may change power level
after entering defrosting time. See page 11.)
4. TEMP COOK/HOLD.
Use the temperature probe
to cook by using a preset temperature. Once food reaches
preset temperature, oven switches to HOLD setting and
maintains that temperature until you touch the
CLEAR/OFF
pad. (See page 15.)
5. COOK 'N WATCH. Use this pad for short-term
cooking which automatically turns oven off after 3
minutes. (See page 10.)
6. AUTO ROAST. Insert probe, touch this pad and then
number pad for desired code number to slow-cook or
temperature-cook
meat with automatic preset program.
(See pages 16 and 17.)
7. CLOCK. Touch this pad to enter time of day or check
time of day while microwaving. To set Clock, first touch
CLOCK pad and then enter time of day. For example, if
time is 1:30, touch number pads 1, 3 and O and "1:30"
will appear in display. Then touch START pad. To reset
or change time, simply repeat above process.
8. POWER LEVEL. Touch this pad before entering
another power level number if you want to change from
automatic power level 10 (High) for cooking or power
level 3 (Low) for defrosting.
9. MIN/SEC TIMER. This feature uses no microwave
energy. It functions as either a kitchen timer, as a holding
period after defrost or as a timer for time cooking. (See
page 9.)
10. CLEAR/OFF. When touched, it shuts off the oven
and erases all settings (except time of day).
11. EXHAUST FAN. Press HI, LO or OFF for the
different fan speeds.
12. NUMBER PADS. Touch these pads to enter cooking
time, defrosting time, time of day, temperature and power
level.
13. QUICK SET CONTROL. Use this pad as a short-
cut method for entering cooking time and power level.
(See pages 12 and 13.)
14. START. After all selections are made, touch this pad
to start the oven.
15. LIGHT. Touch ON to illuminate counter.
AUTOMATIC FN FEATURE
Cooking appliances installed under the oven may,
under some heavy usage conditions, cause temperatures
high enough to overheat some internal parts of the
microwave oven.
To prevent overheating from taking place, the exhaust
fan is designed to automatically turn on at a low speed if
excessive temperatures occur. Should this happen, the fan
cannot be manually turned off, but it will automatically
turn off when the internal parts have cooled. The fan may
stay on up to approximately 30 minutes after the range
and microwave oven controls have been turned off.
6
Advertisement
