Hotpoint RK960 Use And Care Manual page 8

Cookingby Time
The TIME COOK feature allows
you to preset the cooking time.
The oven shuts off automatically.
Power Level 10 is automatically set
for time cooking, but you may
change this for more flexibility.
See your Cookbook.
To become better acquainted with
TIME COOK function, make a cup
of coffee by following the steps
below.
Step 1: Fill a cup 2/3 full of water
and add 1 teaspoon of
freezedried
coffee. Use a
cup that has no metal
decoration. Place
cup in oven and
close door.
Step 2: Touch TIME COOK. The
display shows :0. Signal light
above TIME COOK flashes.Power
Level 10 is automatically set in
oven, but does not appear in
display.
Step 3: Select your time. Touch
1, 2 and Ofor a minute and 20sec-
ends. 1:20 and signal light above
TIME COOK appear on display. If
another Power Level is desired
touch POWER LEVEL and the
number, although Power Level 10
(HIGH) is preferred for this cup of
coffee.
Step 4: Touch START. Time
counting down shows on display.
Step 5: When time is up, oven
sounds and oven, light, and fan
shut off.
@
NOTE: When lower oven is ciean-
ing, microwave fan will remain on
until Lock Light goes out,
e
Questiohs
landAnswers
Q. I set my oven for the time called
for in -the recipe but at the end of
the time allowed, my dish wasn't
done. What happened?
A. Since house power varies due
to time or location, many Time
Cook recipes give you a time range
to prevent overcooking.
Set the
oven for minimum time, test the
food for doneness, and cook your
dish a Ii.ttle longer, if necessary.
Q. I want to cook my dish on a ~ Q. I touched the number pads and
Power Level other than HIGH, what
do I need to do?
A. To change the Power Level,
touch the POWER LEVEL pad after
entering desired cooking time.
Enter the desired number and then
touch START.
Q. Can I interrupt my Time Cook
function to check the food?
A. Yes. To resume cooking, simply
close the door and touch START.
NOTE: Microwave power will not
come on until you are ready. You
must touch START for cooking to
begin.
selected my power level. When I
touched START, however, my oven
didn't come on. Why not?
A. The TIME COOK pad must be
touched before setting the number
pads or else your oven will not be-
gin cooking.
Q. I tried to change Power Level
but the display changed back to
cooking time. Why?
A. After touching Power Level pad
you only have 4 seconds to enter a
the number. Try setting controls
again.
@
8