Date And Time; Holiday Setup - Panasonic k-nl304g User Manual

HDD full
Pack
duration
5.8.5.1.2

Date and time

The date and time interface is shown as in Figure 5-70
Please refer to the following sheet for detailed information.
Parameter
Date format
Time Format
Time zone
System time
Sync PC
DST
NTP
Server
Port
Interval
5.8.5.1.3

Holiday Setup

Holiday setup interface is shown as in Figure 5-71.
Here is for you to select working mode when hard disk is full. There are
two options: stop recording or overwrite. If current working HDD is
overwritten or the current HDD is full while the next HDD is no empty,
then system stops recording, If the current HDD is full and then next HDD
is not empty, then system overwrites the previous files.
Here is for you to specify record duration. The value ranges from 1 to 120
minutes. Default value is 60 minutes.
Figure 5-70
Function
Here you can select date format from the dropdown list.
There are two options: 24-H and 12-H.
The time zone of the device.
It is to set system time. It becomes valid after you set.
You can click this button to save the system time as your PC current
time.
Here you can set day night save time begin time and end time. You can
set according to the date format or according to the week format.
You can check the box to enable NTP function.
You can set the time server address.
It is to set the time server port.
It is to set the sync periods between the device and the time server.
170