Table of Contents
Advertisement
2.3
Main menu
When you enter the BIOS Setup program, the Main menu screen appears, giving you an
overview of the basic system information.
Refer to section "2.2.1 BIOS menu screen" for information on the menu screen items and
how to navigate through them.
Main
Advanced
System
Time [19:34:30]
System Date
Legacy Diskette A
Primary IDE Master
Primary IDE Slave
SATA1
SATA2
SATA3
SATA4
Stroage Configuration
System Information
2.3.1
System Time [xx:xx:xx]
Allows you to set the system time.
2.3.2
System Date [Day xx/xx/xxxx]
Allows you to set the system date.
2.3.3
Legacy Diskette A [1.44M, 3.5 in.]
Sets the type of floppy drive installed. Configuration options: [Disabled]
[360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.] [2.88M, 3.5 in.]
2.3.4
Primary IDE Master/Slave, SATA1~4
While entering Setup, the BIOS automatically detects the presence of IDE/SATA devices.
There is a separate sub-menu for each IDE/SATA device. Select a device item then press
<Enter> to display the IDE device information. The BIOS automatically detects the values
opposite the dimmed items (Device, Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async
DMA, Ultra DMA, and SMART monitoring). These values are not user-configurable. These
items show N/A if no IDE/SATA device is installed in the system.
Type [Auto]
Selects the type of IDE drive. Setting to Auto allows automatic selection of the appropriate
IDE device type. Select CDROM if you are specifically configuring a CD-ROM drive. Select
ARMD (ATAPI Removable Media Device) if your device is either a ZIP, LS-120, or MO drive.
Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]
This item does not appear when you select SATA1/SATA2/SATA3/SATA4 devices.
2-10
Power
[Wed 08/27/2008]
[1.44M, 3.5 in.]
:[Not Detected]
:[Not Detected]
:[Not Detected]
:[Not Detected]
:[Not Detected]
:[Not Detected]
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Boot
Tools
Exit
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Time.
Select Screen
Select Item
+-
Change Field
Tab
Select Field
F1
General Help
F10
Save and Exit
ESC
Exit
ASUS M3N78-CM
Advertisement
Table of Contents
