Emp Shipment Matrix; What's In The Box - Lenovo System x PDU Technical Reference

.

EMP Shipment Matrix

The Environmental Monitoring Probe (EMP) ships standard with some monitored (and
monitored and switched) PDUs, and is an (optional) orderable part for other
monitored PDUs. The EMP needs to be connected to a PDU with monitoring
capabilities and can not be used with the basic PDUs. The following table displays the
PDUs that ship standard with the EMP and those that do not.
PDU Part FC
Number
39M2816 6032/33
46M4004 5894
46M4002 5896
46M4119 5929
46M4137 5931
The optional EMP can be ordered for PDUs 46M4119, and 46M4137 with:
Part Number
46M4113
You can install the device anywhere on the rack by using either the screws or the
self-adhesive hook-and-loop fasteners. Once attached to the rack, connect the CAT5
cable to the PDU Sensor connector (1U PDU) or the Ethernet connector (0U PDU) as
seen below.
Figure 114: 1U EMP connector
Note: The EMP can also be connected to a supported UPS if the UPS is equipped with
a Network Management Card (NMC).

What's in the box?

The Environmental Monitoring Kit (46M4113) is shipped with the following items:
One Environmental Monitoring Probe (EMP)
•
Screws
•
Hook-and-loop fasteners
•
Tie wrap
•
Ethernet cable
•
Warranty and Important Notices Flyer, and Environmental Notices CD
•
177
Description
DPI Enterprise PDU+ C13
1U 12 C13 Switched and Monitored PDU
1U 9 C19 / 3 C13 Switched and
Monitored PDU
0U 24 C13 Switched and Monitored PDU
0U 12 C13 / 12 C19 Switched and
Monitored PDU
Description
Optional Lenovo Environmental Monitoring Probe (EMP) Kit
0U EMP connector
EMP Ships
Standard (Yes/No)
Yes
Yes
Yes
No (optional)
No (optional)