.
Attached 32A 1ph Cord (IEC309 P+N+G)
IEC 309 P+N+G 3.0 meter (4.3m) - 32A / 220-240VAC Single Phase
Only a receptacle or a connector is needed to mate with the plug on the PDU input
line cord. See the
Additional Plug Information
further details on IEC309.
Matching receptacle listing 532R6W IP-67 HUBBELL, Hubbell receptacle P/N
HBL532R6W
Matching connector listing 532C6W IP-67 HUBBELL, Hubbell connector P/N
HBL532C6W
Used with:
Basic PDU:
46M4131 –
0U 24 C13 PDU
Switched and Monitored PDU:
46M4119 –
0U 24 C13 Switched and Monitored PDU
Figure 108: IEC309 P+N+G 32A single phase plug
172
on page
191
in this document for