Scotsman SCN60 Installation And User Manual

Scotsman SCN60 Installation And User Manual

Residential nugget ice machine
Hide thumbs Also See for SCN60:

Advertisement

Installation and User's Manual for
Residential Nugget Ice Machine
Model SCN60

Advertisement

Table of Contents
loading

Summary of Contents for Scotsman SCN60

  • Page 1 Installation and User's Manual for Residential Nugget Ice Machine Model SCN60...
  • Page 2: Table Of Contents

    This manual includes information for the installation, operation and maintenance of the SCN60 residential ice machine. The SCN60 was developed to offer fans of Scotsman’s Nugget Ice form the ability to have that ice in their homes. Previously Nugget Ice was only...
  • Page 3: Product Description

    The water to the machine must be potable, or fit for human consumption. Beyond that, water supplies The SCN60 is made up of two major systems: the vary in the degree of mineral content. As this ice ice making system and the ice storage system. The...
  • Page 4: Cabinet Dimensions

    They meet or exceed the standards of agencies like ETL. Scotsman assumes no liability or responsibility of any kind for products manufactured by Scotsman that have been altered in any way, including the use of any parts and/or other components not specifically approved by Scotsman.
  • Page 5: Location Recommendations

    SCN60 User's Manual Location Recommendations: The machine can be built into a cabinet. It is an air Drain Conversion: A gravity drain model can be cooled refrigeration system and so air flows in and converted to a drain pump model by installing a out of it through the grill at the bottom front.
  • Page 6: Decorating Features

    Door Panels: Finished door panels are available are provided in the door for this purpose. from Scotsman for attachment to the machine, or a custom panel can be made. The panel kits are: See instructions in information packet to create and...
  • Page 7: Door Panel Attachment

    SCN60 User's Manual Door Panel Attachment Use Upper Hole at the Scotsman Door Panel Gasket Machine Screw Hole Plug Use Lower Hole at the Bottom Cover May 2011 Page 6...
  • Page 8: Door Swing

    SCN60 User's Manual Door Swing Note: Prior models had separate hinge brackets 4. Remove hole plugs or screws from unit's new and different directions to change swing. hinge locations, set aside. Moving the hinges allows the door to open from 5.
  • Page 9: Plumbing - Pump Model

    SCN60 User's Manual Plumbing - Pump Model Drains Water Supply There are two types of ice machine models, one The recommended water supply tubing is ¼ inch that drains by gravity and one that has an internal OD copper. Stainless steel flex or reinforced PCV drain pump.
  • Page 10: Plumbing: Gravity Drain Model

    SCN60 User's Manual Plumbing: Gravity Drain Model Caution: Restrictions in the drain system to the 6. Cut an 8” piece of 5/8” ID X 7/8” OD tygon (clear machine will cause water to back up into the ice plastic) tubing. Slide one end of the tube onto the storage bin and melt the ice.
  • Page 11: Electrical And Start Up

    The storage bin holds about 20 lb of ice when full. Ice level control The ice level control for the SCN60 is an ultrasonic sensor, located above the ice storage area. It is automatic and there is no adjustment to make.
  • Page 12: Use

    SCN60 User's Manual No special instructions are needed for use. Just Noise: take as much ice as you need, the machine will replace it. A scoop is provided, and it can be stored The ice machine is designed for quiet operation,...
  • Page 13: Maintenance

    SCN60 User's Manual Maintenance Scotsman strongly recommends regular 4. Return the kickplate and front service panel to their original positions. Fasten them to the cabinet maintenance of this ice machine. During normal using the original screws. operation mineral scale that is in the water supply will gradually build up on the ice making surfaces.
  • Page 14: How To Remove Scale From The Ice Making System

    SCN60 User's Manual How to remove scale from the ice making system. Cleaning this machine involves adding a solution of scale remover and water to the ice machine and continuing to add it as it makes ice. The scale remover must be diluted to the correct ratio. A squirt bottle will make adding the scale remover much easier when the unit is built in.
  • Page 15 SCN60 User's Manual 6. Locate float valve on/off lever. Move lever up 8. Obtain pre-mixed Scotsman Clear 1 Scale about half way to shut water off. remover solution (with squirt bottle) or mix a solution of Clear 1 with water: 2.5 ounces of Clear 1 with 1 quart (32 oz) of warm water.
  • Page 16 SCN60 User's Manual 11. Press and HOLD the both the Clean-Reset and 14. Return the reservoir cover to its original On/Off buttons for 5 seconds. The Time to Clean position. light will blink on and off. 15. Return the upper back wall of the bin to its original position and secure it with the original screws.
  • Page 17 SCN60 User's Manual What to do before calling for service Low capacity • Check for restricted drain or standing water in the bin • Clean the air cooled condenser fins • Clean the ice making system No ice • Check on-off switch •...
  • Page 18 SCOTSMAN ICE SYSTEMS 775 Corporate Woods Parkway Vernon Hills, IL 60061 800-726-8762 www.scotsman-ice.com 17-3341-01...

Table of Contents