Panasonic KX-TG9581 Operating Instructions Manual page 49

Sub-menu 1
Change language
Main menu: "Customer support"
Operation
Displaying customer support Web address.
Main menu: "Key detector"
Sub-menu 1
Search
Battery check
*1 For Line 1
*2 For Line 2
*3 If you program these settings using one of the units, you do not need to program the same item using
another unit.
*4 After the Bluetooth device is paired, the device name is displayed.
*5 For CELL 1
*6 For CELL 2
*7 For CELL 3
*8 For CELL 4
*9 The preset melodies in this product are used with permission of © 2007 Copyrights Vision Inc.
*10 This feature allows the unit to automatically adjust the date and time each time caller information
including date and time is received.
To turn this feature on, select "Caller ID auto". To turn this feature off, select "Manual". (Caller
ID subscribers only)
To use this feature, set the date and time first (page 17).
*11 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to 5). If
you select a melody, you cannot distinguish lines by their ringers.
*12 This tone lets you know when you receive an outside call while you are on another line or an
intercom call. If you select "On", the tone sounds 2 times.
*13 This setting is available when you have the key detector (KX-TGA20). Read the installation guide for
more information on the key detector.
*14 For models with supplied key detectors, the display shows "1:Detector1".
*15 If you register 2 or more key detectors.
*16 The base unit display is as follow:
Handset
Block w/o num.
*17 This menu is not displayed when scrolling through the display menus. It is only available in direct
command code.
*18 You can set music play during the hold. The preset melody in this product is used with permission of
© 2006 Copyrights Vision Inc.
*19 If you subscribe to a Caller ID service and want to view the caller's information after lifting up the
handset to answer a call, turn off this feature.
*20 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if
necessary. The setting should stay at "700 ms" unless pressing MFLASHN fails to pick up the
waiting call.
For assistance, please visit http://www.panasonic.com/help
TG958x_0704_ver031.pdf 49
Sub-menu 2 Settings
Display <English>
Español
*3 <English>
Voice prompt
Español
*13
Sub-menu 2 Settings
–
–
Base unit
Block w/o number
Programming
Code Unit
#110
#112
Code Unit
#680
Code Unit
– #655
–
2014/07/04 10:32:27
17
/
17
/
–
/
–
49