Handset Battery Charging; Handset Battery Installation - Panasonic KX-TG9581 Operating Instructions Manual

Getting Started
To connect to 2 single-line telephone jacks
Example: DSL/ADSL line is line 2
Connect the "Transparent" plug telephone line
cord (2-wire cord) (
single-line telephone jack (RJ11C) (
you hear a click.
Connect the "GREEN" plug telephone line
cord (4-wire cord) (
4
(not supplied) ( ), then to the single-line
telephone jack (RJ11C) (
click.
1
"Transparent" plug
1
2
4
5
*DSL/ADSL filter (not supplied) is required if you
have DSL/ADSL service.

Handset battery installation

R USE ONLY rechargeable Ni-MH batteries AAA
1
(R03) size ( ).
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities (
R Follow the directions on the display to set up
the unit.
12
TG958x_0704_ver031.pdf 12
1
) to the unit, then to the
2
) until
3
) to a DSL/ADSL filter
5
) until you hear a
2
3
"GREEN"
plug
, ).
1
For assistance, please visit http://www.panasonic.com/help

Handset battery charging

Charge for about 7 hours.
R Confirm "Charging" is displayed (
R When the batteries are fully charged, "Fully
charged" is displayed.
Handset battery level
Icon Battery level
High
Medium
Low
Needs charging.
Empty
Panasonic Ni-MH battery performance
(supplied batteries)
Operation
In continuous use
Not in use (standby)
*1 If eco mode is on.
Note:
R Actual battery performance depends on usage
and ambient environment.
2014/07/04
1
).
1
Operating time
*1
15 hours max.
*1
7 days max.
10:32:24