Panasonic KX-TG9581 Operating Instructions Manual page 38

Phonebook
Key Character
7 P Q
p q
8 T U
t u
9 W X
w x
0 0
# #
R To enter another character that is located on the
same dial key:
Handset: Press MEN to move the cursor to the
next space.
Base unit: Press M
the next space.
R If you do not press any dial key within 5
seconds after entering a character, the
character is fixed and the cursor moves to the
next space.
R in the above table represents a single space.
Erasing the character or number
Handset: Press MFN or MEN. a MCLEARN
Base unit: Press M N or M
R Press and hold MCLEARN to erase all characters
or numbers.
Groups
Groups can help you find entries in the phonebook
quickly and easily. You can search for phonebook
entries by group. By assigning different ringer
tones for different groups of callers, you can
identify who is calling (ringer ID), if you have
subscribed to Caller ID service.
Setting ringer ID
Handset
1
MFN a MMENUN
2
MbN: "Group" a MSELECTN
3
MbN: Select the desired group. a MSELECTN
4
MbN: Select the desired ringer tone. a MSAVEN
5
MOFFN
38
TG958x_0704_ver031.pdf 38
R S 7
r s 7
V 8
v 8
Y Z 9
y z 9
N to move the cursor to
N. a MCLEARN
For assistance, please visit http://www.panasonic.com/help
Finding and calling from a
phonebook entry
Once you have found the desired entry using one
of the following 4 methods, make a call with your
unit.
n Using a cellular line:
Handset
1
MCELLN
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular calls
(page 21).
2
MbN: Select the desired cellular phone. a
MSELECTN
Base unit
Press the desired cellular line key (MCELL 1N to
MCELL 4N) a Lift the corded handset.
n Using a landline:
Handset
M N
R You can also make a call by pressing ML1N or
ML2N.
Base unit
Lift the corded handset.
R You can also make a call by pressing MLINE 1N
or MLINE 2N, then lifting the corded handset.
Scrolling through all entries
Handset / Base unit
1
Proceed with the operation for your unit.
Handset: MFN
Base unit: M N
2
MbN: Select the desired entry.
Searching by first character
Handset / Base unit
1
Proceed with the operation for your unit.
Handset: MFN
Base unit: M N
2
Press the dial key (0 – 9 or #) which
contains the character you are searching for
(page 37).
3
MbN: Scroll through the phonebook if
necessary.
2014/07/04 10:32:26