Phonebook
entry, press MDN (Pause) on the handset or
MPAUSEN on the base unit to add pauses after
the number and PIN as necessary (page 23, 28).
R If you have rotary/pulse service, you need to
press * (TONE) before pressing MFN
the handset or M
N on the base unit in step 1
to change the dialing mode temporarily to tone.
When adding entries to the phonebook, we
recommend adding * (TONE) to the beginning
of phone numbers you wish to chain dial
(page 37).
Speed dial
You can store phone numbers to the base unit and
handset separately:
– Handset: up to 10 entries.
– Base unit: up to 20 entries.
Adding phone numbers to speed dial
keys
Handset
You can assign 1 phone number to each of the
dial keys (1 to 9, or 0 (10)).
n By entering phone numbers:
1
Press and hold the desired speed dial key
(1 to 9, or 0 (10)). a MADDN
2
MbN: "Manual" a MSELECTN
3
Enter the party's name (16 characters
max.). a MOKN
4
Enter the party's phone number (24 digits
max.). a MOKN
5
MSELECTN a MOFFN
n From the phonebook:
1
Press and hold the desired speed dial key
(1 to 9, or 0 (10)). a MADDN
2
MbN: "Phonebook" a MSELECTN
3
MbN: Select the desired entry.
4
MSAVEN a MOFFN
Base unit
n By entering phone numbers:
1
MSPEED DIALN
2
MbN: Select the desired speed dial key. a
MEDITN
40
TG958x_0704_ver031.pdf
40
on
For assistance, please visit http://www.panasonic.com/help
3
Enter the party's name (16 characters
max.). a MOKN
4
Enter the party's phone number (24 digits
max.). a MOKN
5
MSELECTN a MEXITN
n From the phonebook:
1
MSPEED DIALN
2
MbN: Select the desired speed dial key. a
M
N
3
MbN: Select the desired entry.
4
MSAVEN a MEXITN
Note for handset and base unit:
R If you edit a phonebook entry which is assigned
to a speed dial key, the edited entry does not
transfer to the speed dial key.
Note for base unit:
R You can also select the desired entry as follows:
– 1 to 10: Press and hold the desired speed
dial key (1 to 9, or 0 (10)).
– 1 to 20: Press MSPEED DIALN and then enter
the desired speed dial key (1 to 20).
Editing an entry
Handset
1
Press and hold the desired speed dial key (1
to 9, or 0 (10)). a MMENUN
2
MbN: "Edit" a MSELECTN
3
Edit the name if necessary. a MOKN
4
Edit the phone number if necessary. a MOKN
5
MSELECTN a MOFFN
Base unit
1
MSPEED DIALN
2
MbN: Select the desired entry. a MDETAILN
3
MEDITN
4
Edit the name if necessary. a MOKN
5
Edit the phone number if necessary. a MOKN
6
MSELECTN a MEXITN
Erasing an entry
Handset
1
Press and hold the desired speed dial key (1
to 9, or 0 (10)). a MMENUN
2014/07/04
10:32:27