Recording Your Greeting Message; Other Settings - Panasonic KX-TG9581 Operating Instructions Manual

Getting Started
4
Enter the current hour and minute (12-hour
clock format) by selecting 2 digits for each.
Example: 9:30
09 30
5
Proceed with the operation for your unit.
Handset: *: Select "AM" or "PM".
Base unit: MAM/PMN: Select "AM" or "PM".
6
MSAVEN
7
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Note:
R When English is selected as the display
language, 12-hour clock format is used. When
Spanish is selected, 24-hour clock format is
used.
Recording your greeting
message
You can record your own greeting message
instead of using a pre-recorded greeting message.
See page 62 for details.
Handset / Base unit
1
For line 1: MMENUN#3021
For line 2: MMENUN#3022
2
MbN: Select the desired greeting message. a
MSELECTN
3
MbN: "Yes" a MSELECTN
4
Record a greeting message. a MSTOPN
5
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN

Other settings

Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is "Tone".
"Tone": For tone dial service.
"Pulse": For rotary/pulse dial service.
Program this setting using either the base unit or
one of the handsets.
18
TG958x_0704_ver031.pdf 18
For assistance, please visit http://www.panasonic.com/help
Handset / Base unit
1
MMENUN#120
2
MbN: Select the desired setting. a MSAVEN
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Line selection mode for landline
The line selection mode determines which line is
selected when:
– you lift the corded handset
– you press M N/MZN on the handset (when
making/answering calls)
– you press MZN on the base unit (when making/
answering calls)
The following setting is available:
– "Auto" (default): When making a call, line 1 is
selected. If that line is unavailable, line 2 is
selected. When you call back using the caller
list (page 54) or while listening to a message
(page 63, 64), the indicated line is used.
When answering a call, the ringing line is
selected.
– "Line1": Line 1 is selected.
– "Line2": Line 2 is selected.
Handset / Base unit
1
MMENUN#250
2
MbN: Select the desired setting. a MSAVEN
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Note:
R You can select a line manually regardless of the
line selection mode by pressing ML1N/ML2N on
the handset or MLINE 1N/MLINE 2N on the base
unit.
2014/07/04 10:32:25