Panasonic Viera TC-P50S20H Operating Instructions Manual page 7

50” class 1080p plasma hdtv
Table of Contents

Advertisement

Accessories / Options
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal for any other TV or displays.
Otherwise the TV or the display may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal while it is physically damaged, personal injury may result. Contact your
nearest Panasonic dealer immediately.
During set-up, make sure that all screws are securely tightened.
If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal
will not be strong enough to support the TV, and it might fall over and become damaged, and
personal injury may result.
Ensure that the TV does not fall over.
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over
and personal injury may result.
Two or more people are required to install and remove the TV.
If two or more people are not present, the TV may be dropped, and personal injury may result.
Assembly screw (4)
(silver)
Assembling the pedestal
Use the assembly screws
right poles
Make sure that the screws are securely tightened.
Forcing the assembly screws the wrong way will
strip the threads.
"L" or "R" mark is stamped on the bottom of the
pole.
Securing the TV
Insert the pole into the TV, and then fasten securely
with the assembly screws
Tighten the four assembly screws loosely at first,
then tighten them firmly to fix securely.
Carry out the work on a horizontal and level
surface.
6
Attaching the pedestal
Assembly screw (4)
(black)
M5 × 18
to fasten the left and
to the base
securely.
.
Hole for pedestal installation
Pole (2)
L
M5 × 30
Base
R
A
-
R
Front
B
Arrow mark
D
[View from the bottom]
-
L

Advertisement

Table of Contents
loading

Table of Contents